Yokogawa DAQWORX Instrukcja Użytkownika Pobierz pdf (Strona 248)

7-52

IM WX104-01E

SNTP Client

• Use

Select [Use] to use the SNTP client function; Otherwise, select [Not]. If you select [Use],

the SNTP client settings are displayed.

• Server Name

Set the SNTP server name using up to 64 alphanumeric characters.

• If the DNS is used, you can set the host name as a server name.

• You can also set the IP address. In this case, the DNS is not required.

• Port No.

Enter the port number of the le transfer destination SNTP server in the range of 1 to

65535. The default value is 123.

• Access Interval

Set the time interval for synchronizing the time with the server to OFF, 1, 8, 12, or 24h.

If you select OFF, you can synchronize the time manually by operating soft keys. The

time is not synchronized if the difference in the time between the MV and the server is

greater than or equal to 10 minutes.

• Ref. Time

Set the reference time for making queries.

• Access timeout

Set the time to wait for the response from the SNTP server when querying the time to

10, 30, 90s.

• Time adjust (start)

Select [On] to synchronize the time using SNTP when memory start is executed;

Otherwise, select [OFF].

7.5 Entering Basic Settings

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 335 336

Brak uwag

Yokogawa DAQWORX Instrukcja Użytkownika Strona 248